Topcon CTS-3000

CTS-3000 construction total station

The CTS-3000 construction total station series features onboard software that simplifies staking. An extended keyboard enables easy operation and data input. The system software can also be operated with a hand-held data collector, like Topcon's FC-100. Reflectorless measurement capabilities up to 250m (820 ft.) and a prism type range of 3,000m (9842 ft.) to a single standard size prism provide the range needed to cover most job sites.

CTS-3000 Construction Total Station Features:

  • CTS – Contractors Total Station 
  • Layout and offset measurement made easy 
  • Reflectorless measurement to 250m 
  • Easy on-board software or use with hand-held collector 
  • Class 1, eye-safe laser

The pinpoint reflectorless measurement function will increase the productivity and flexibility of your measurements. Use a prism or not, it’s up to you. Utilize the CTS construction total station series to help you keep control on the job site. Replace lost or disturbed stakes, or use it to make spot measurements for elevations.

SPECIFICATIONS of CTS-3000 Construction Total Station:

Telescope
Length 150 Millimeters
Objective Lens Diameter 45mm(EDM:50mm)
Magnification 30X
Image Erect
Field of View 1°30’
Resolve Power 2.8 "
Min. Focus Distance 1.3 meters
Measurement Range
1 Prism 9900 ft, 3000 meters
Mini Prism 6.6 – 4,920 ft, 2 – 1,500 meters
Pin Pole Prism 6.6 – 8,200 ft, 2 – 2,500 meters
Non-Prism Mode 5 – 820 ft, 1.5 – 250 meters
Measuring Accuracy
Prism Mode ±(3mm+2ppmxD*)m.s.e. fine, ±(10mm+2ppmxD*)m.s.e. coarse
Non-Prism Mode ±(10mm) m.s.e. fine(3-25m), ±(3mm+2ppm) m.s.e. fine(25m or more), ±(10mm+2ppm) m.s.e. coarse
Minimum reading 0.2mm(0.001ft.) / 1mm(0.005ft) fine, 1mm(0.005ft) / 10mm(0.02ft.) coarse, 10mm(0.02ft.) tracking
measurement time 1mm:1.2 sec.(Initial 3.0 sec.)/0.2mm:3.0 sec (Initial 4.0 sec.) fine, 0.5 sec.(Initial 2.5 sec.) coarse, 0.3 sec.(Initial 2.5 sec.) tracking
Angle Measurement
Method Absolute
Detection up to 2 sides horizontal, up to 2 sides vertical
Minimum reading 1"/5" arc sec, 0.2/1 mgon
Accuracy up to 2" arc sec, 0.6 mgon
Diameter of Circle 71 Millimeters
Tilt Correction
Type Single or Dual Axis
Compensating Range ± 3’
Correction Unit 1" arc sec, 0.1 mgon
Environmental
Circular level sensitivity 10’ /2mm
Plate level sensitivity 30" /2mm
Optical Plummet 3x Magnification, 0.5m to infinity Focusing Range, Erect Image, 5° Field of View
Laser Plummet LD (Visible Laser) light source, 633nm wave length, 1mW Maximum output, Class 2 (IE Publication) / Class II (FDA/BHR 21 CFR 1040) class
Laser Pointer LD (Visible Laser) light source, 690nm wave length, 1mW Maximum output, Class 2 (IE Publication) / Class II (FDA/BHR 21 CFR 1040) class, provided point guide
Dimensions (HxWxL) 13.2 x 7.2 x 6.9 inches, 336 x 184 x 174 Millimeters
Instrument Weight(with battery) 11.4 pounds, 5.2 kg
Case Weight 7.1 pounds, 3.2 kg
Dust/Water Protection IP66 rating
Operating Temperature -20° to +50° Celsius, -4° to +122° Fahrenheit
Power
source NiMH Battery BT-52Q
Output Voltage DC7.2 Volts
Capacity 2700 mAh
approximate battery life 4.2 hours including distance measurement, 45 hours Angle measurement only
Battery Charger
ID BC-27
input voltage AC100-240 Volts
Frequency 50/60 Hertz
Recharging time 1.8 Hours
operating temperature +10° to +40° Celsius, +50° to +104° Fahrenheit
Other
Bluetooth Wireless Capability no


Call Alabama Total Station today at  (888) 211-3229  or Contact your local Topcon Dealer or fill out a contact form request for more information concerning this construction total station or your other land surveying needs.

Share this:
Share this page via Email Share this page via Stumble Upon Share this page via Digg this Share this page via Facebook Share this page via Twitter